| PRODUCTS: |
The Company manufactures the following range of products:
|
| 1 |
Concrete & Mortar Admixtures |
| Setplast 260 |
High range water reducing superplasticizer conforming to ASTMC-494 Type F, suitable for hot weather concreting.
Specifications:
Page 1 Page 2
|
| Setplast 180 |
Integral Waterproofing admixture as per IS : 2645 & water reducer.
Specifications:
Page 1 Page 2
|
| Setplast 360 (WRA) |
Sulphonated Napthalene formaldehyde and Lignosulphonate based plasticizer cum water reducer.
Specifications:
Page 1 Page 2
|
| Setplast 140 |
Lignosulphonate based normal plasticizer cum water reducer.
Specifications:
Page 1 Page 2
|
| Setplast 340 |
High range, sulphonated naphthalene formaldehyde based superplasticizer , conforming to ASTM C 494 type G, suitable for hot weather concreting & water reducer.
Specifications:
Page 1 Page 2
|
| Setplast 340 (PQC) |
Super plasticizer for pavement quality concrete.
Specifications:
Page 1 Page 2
|
| Setplast 350 |
Modified Naphthalene based superplasticizer cum retarder, conforming to ASTM C 494 type F & IS : 9103 suitable for all weather concreting & water reducer.
Specifications:
Page 1 Page 2
|
| Setplast 360 |
High range water reducing superplasticizer cum retarder, suitable for higher grade concreting in all weather conditions and conforming to IS : 9103 & ASTM C 494, Type F. (WRA)
Specifications:
Page 1 Page 2
|
| Setplast AEP |
Air-entraining admixture for mass and dam concreting in low temperature conditions to arrest freeze thaw effects
Specifications:
Page 1 Page 2
|
| Setcrete AER |
Air-entraining cum retarding admixture for mass concreting, arresing freeze thaw effects, high heat dissipation or to facilitate cohesiveness in pumping concrete.
Specifications:
Page 1 Page 2
|
| Set Rapid |
Chloride free accelerating, water reducing admixture.
Specifications:
Page 1 Page 2
|
|
| 2 |
Concreting Aids |
| Setrelease No.10 |
Concentrated, Oil based mould-releasing compound for clean, fair faced concrete.
Specifications:
Page 1 Page 2
|
| Setrelease No.1 |
Ready to use, oil-based mould release oil for clean, fair-faced concrete.
Specifications:
Page 1 Page 2
|
| Setcure RAP |
Resin-based, Aluminium pigmented, curing compound.
Specifications:
Page 1 Page 2
|
| Setcure WP |
Paraffin wax based curing compound, pigmented with titanium dixoide.
Specifications:
Page 1 Page 2
|
|
| 3 |
Grouts |
| Setplast EGA |
Expanding grout admixure, fluidifying agent for injection grouting.
Specifications:
Page 1 Page 2
|
| Grout NS 500 |
Ready mix, non-shrink chloride-free, cementitious grout for general use.
Specifications:
Page 1 Page 2
|
| Grout NS 700 |
Ready mix, high early & final strength, non-shrink, Cementitious grout.
Specifications:
Page 1 Page 2
|
|
| 4 |
Repair Mortars |
| Set Rapid Mortar |
Ready mix cementitious composite mortar for extra quick setting and plugging leakages.
Specifications:
Page 1 Page 2
|
| Setplug |
Ready mix, cementitious quick setting compound.
Specifications:
Page 1 Page 2
|
| Setcrete CRM |
Thixotropic Polymer modified cement based two component system.
Specifications:
Page 1 Page 2
|
| Setcrete CS |
Thixotropic Polymer modified cement based single component crack repair mortar.
Specifications:
Page 1 Page 2
|
|
| 5 |
Tunneling Aid |
| Quickset Liquid |
Accelerating admixture for reduction of rebound loss and quick setting of wet dry shotcrete mortar.
Specifications:
Page 1 Page 2
|
| Quick Set Powder |
Accelerating admixture for reduction of rebound loss and fast setting of dry shotcrete mortar.
Specifications:
Page 1 Page 2
|
| Set bolt |
Ready mix cement capsules for rock anchoring.
Specifications:
Page 1 Page 2
|
| Set bolt R |
Resin capsule for Rocks stabilization.
Specifications:
Page 1 Page 2 Page 3
|
| Setshot LAF |
Alkali free shotcrete accelerator. (Wet)
Specifications:
Page 1 Page 2
|
| Setshot PAF |
Alkali free shotcrete accelerator. (Dry)
Specifications:
Page 1 Page 2
|
|
| 6 |
Protective Coatings |
| Rustproof |
Acrylic ploymer based, cementitious anti-corrosive coating for steel and reinforcements.
Specifications:
Page 1 Page 2
|
|
| 7 |
Tile Adhesive
|
| Setfix TA |
Ready mix Cementitious compound specially formulated for fixing tiles and stones for cladding.
Specifications:
Page 1 Page 2
|
|
| 8 |
Waterproofing Compounds |
| Setflex WP |
Acrylic polymer for chemical waterproofing; compatible with all types of cement.
Specifications:
Page 1 Page 2
|
| Setflex Super WP |
Pre-packed, two component, acrylic polymer based, film-forming water proofing compound.
Specifications:
Page 1 Page 2
|
| Setcrete SB |
Latex based compound, suitable for waterproofing, bonding, putty Admixture.
Specifications:
Page 1 Page 2 Page 3
|
| Setpolycoat M |
State of the art, pore sealing, polymer based Cementitious waterproofing compound for all conditions.
Specifications:
Page 1 Page 2 Page 3
|
|
| 9 |
Bonding Aid |
| Eposet BA |
Two component epoxy based structural bonding compound for old to new concrete, metal to concrete, joint sealing, with long pot life.
Specifications:
Page 1 Page 2
|
|
| 10 |
Flooring Treatment |
| Set Clean Top |
Floor cleaning compound.
Specifications:
|
| Set Hard Top-M |
Metallic floor hardening compound for concrete floors.
Specifications:
Page 1 Page 2
|
| Set Hard Top-NM |
Non-metallic floor hardening compound for concrete floors.
Specifications:
Page 1 Page 2
|
|
| 11 |
Cement Activator |
| Set Activa |
Fly ash and slag cement activation or early gain of strength.
Specifications:
Page 1 Page 2
|
|
| 12 |
Sealant |
| Set Sealant |
Polysulphide based sealant available in two grades for expansion/contraction joints.
Specifications:
Page 1 Page 2
|
|
|
|